Service für VOC Probenvorbereitungssysteme
• Aufstellung und Einarbeitung
• Gerätewartung / Service
• Installation Qualification, Operation Qualification, Performance Qualification / Requalifizierungen
• Telefonservice während der Bürozeiten
• Anwendungsberatung
• Unterstützung durch Applikationslabor
VOC Probenvorbereitungssysteme
Sie erhalten von uns technische Unterstützung sowie Ersatzteile für Teledyne Tekmar Purge&Trap und Headspace Systeme.
Aktuelle Tekmar VOC Systeme:
Lumin
Atomx XYZ
Der Atomx XYZ ist ein Purge & Trap Probenvorbereitungssystem mit automatischem XYZ-Probengeber zur Analyse von VOCs in festen und flüssigen Proben. Der Atomx XYZ automatisiert die komplette Probenvorbereitung für eine Vielzahl von Proben einschließlich Wasser- und Bodenmatrix, Trinkwasser und Abwasserproben.AQUATek LVA
Der AQUATek LVA ist ein Purge & Trap-Autosampler, der die Probenvorbereitungsschritte für die Analyse von flüssigen Proben unter Verwendung einer festen Volumen-Probenschleife automatisiert.VOC Vorgängersysteme
Atomx
The Atomx combines an Autosampler and Purge and Trap into a single instrument for the analysis of VOCs in solid and liquid samples. Atomx completely automates sample preparation and Purge & Trap steps including vial handling, sample volume measurement, standard injections, dilutions, rinsing, purging, desorption and baking.
Ersatzteile ATOMX / Spare Parts (PDF)
Technische Unterstützung / Service
HT3
Versa
Ersatzteile VERSA / Spare Parts (PDF)
Technische Unterstützung / Service
AQUATek 100
The AQUATek 100 is a purge and trap autosampler that automates the sample preparation steps for the analysis of liquid samples utilizing a fixed volume sample loop filled using a pressurization gas.
Ersatzteile AQUATek / Spare Parts (PDF)
Technische Unterstützung / Service
3100 Sample Concentrator
The 3100 Sample Concentrator purges volatiles from a solid or liquid matrix onto a sorbent trap. This trap is then rapidly heated and the analytes swept with GC carrier gas onto the GC column for separation and detection.
Technische Unterstützung / Service
Aktuelles Modell: STRATUM Purge & Trap System
Velocity XPT Accelerated Purge and Trap System
Accelerated Purge and Trap technology lets you independently control the flow rate during all modes, greatly reducing dry purge and bake times.
Ersatzteile Velocity XPT / Spare Parts (PDF)
Technische Unterstützung / Service
Nachfolger: STRATUM Purge & Trap System
Stratum
AQUATek 70 Vial Autosampler
The AQUATek 70 is a water autosampler for purge and trap concentrators. AQUATek 70 automatically measures the sample from each vial, adds a standard solution, and then transfers it to a Purge and Trap Sample Concentrator for analysis.
7000 Headspace Autosampler
The 7000HT offers sample mixing for fast equilibration times, constant heat time for unmatched sample reproducibility and throughput, complete method optimization mode and sample temperatures to 200°C. The 7000HT Headspace Analyzer has 50 vial positions.
Technische Unterstützung / Service
Nachfolger: VERSA Headspace Autosampler
AQUATek 70 Vial Autosampler
The AQUATek 70 is a water autosampler for purge and trap concentrators. AQUATek 70 automatically measures the sample from each vial, adds a standard solution, and then transfers it to a Purge and Trap Sample Concentrator for analysis.
Kontakt
Zentrale
ANTEC GmbH
Analysen- und Prozesstechnik
Hauptstraße 4
82404 Sindelsdorf
Telefon: +49 (0) 8856 9910
E-Mail: kontakt@antec.de
Kundendienst
ANTEC GmbH
Service und technische Auskünfte
Telefon: +49 (0) 89 72069268
E-Mail: service@antec.de